成功案例 在线留言

联系我们

中康泰博水性漆
地  址:天津市武清区京津科技谷市级开发区
联系人:康先生
电  话:022-82967303
邮  编:301721
邮  箱:zhongkangtaibo@126.com

产品新闻

水性环氧中层涂料调配使用效果
  摘要:环氧类的中层涂料一般在底漆和面漆之间使用,需要一个很好的衔接能力和附着力效果。水性环氧中层涂料作为中间漆使用有一定的功能性的成分特征,在使用的过程中需要与相关产品调配使用,配合效果最佳。
 
  Abstract: the middle of epoxy coating is in commonly used between primers and paint, need a good capacity for cohesion and adhesion effect. Waterborne epoxy middle coating is used as intermediate paint has some characteristics of functional components and related products in use process to allocate, cooperate with best effect.
 
  水性环氧中层涂料性能特点
 
  水性环氧中层涂料算是双组份的涂料,所谓双组份顾名思义需要配合稀释剂进行调配之后使用。水性的环氧树脂成膜能给有很强大稳定的效果,加入特有的云铁氧化铁和防锈颜料。无论是在颜色还是在性能上都十分有特点。
 
  Waterborne epoxy middle paint is a two-component coating, the so-called a two-component, just as its name implies is prepared in the need to cooperate with thinner after use. Water-based epoxy resin film to have a strong and stable effect, add special micaceous iron oxide iron oxide and antirust paint. Whether in color or in performance is very characteristic.
 
  水性环氧中层涂料加入灰色云铁氧化铁,所以漆料常常为灰色。另外成分的特点所致对集采能给又超强的粘结能力,附着力极强,耐磨损也具有一定的抗冲击的能力。兼具了环氧类产品的 特点,成为一种具有良好屏蔽能力的保护性防腐涂料。
 
  Waterborne epoxy middle coating to join the grey micaceous iron oxide iron oxide, so often for grey paint. Other ingredients can be caused by the in to the characteristics of strong adhesive ability, strong adhesion, wear resistance and has a certain impact resistant ability. Both the characteristics of the epoxy products, become a kind of protective coatings with good shielding ability.
 
  水性环氧中层涂料的调配标准
 
  一般来说,水性环氧中层涂料的调配需要用稀释。搅拌均匀并且放置10min,待其充分熟化之后根据基面大小调配用量。当然,在稀释的过程中要格外注意水量的配合,调制到所需黏度。并且在使用的时候需要与环氧、丙烯酸聚氨酯、氯化橡胶等产品配套使用,达到想要的效果。
 
  In general, waterborne epoxy middle paint mixing need to use the dilution. Stir well and put 10 min, after its full curing allocate dosage according to the size of the base level. Of course, take special attention in the process of dilution water, modulation to the required viscosity. And it needs to be in use with epoxy, acrylic polyurethane, chlorinated rubber, and other products, to achieve the desired effect.